2024 Toro Greensmaster® TriFlex™ 3320 (04530)
- Year 2024
- Make Toro
- Model Greensmaster® TriFlex™
- Engine Briggs & Stratton® Vanguard®
2024 Toro Greensmaster® TriFlex™ 3320 (04530)
2024 Toro Greensmaster® TriFlex™ 3320 (04530)
The Greensmaster® TriFlex™ Mowers were designed to take precision cutting on a greens mower to a completely new level. Adopting the proven Flex suspension, the cutting units float freely over contours and undulations of the green resulting in a superior quality of cut and aftercut appearance. Improved serviceability is another major advantage of the TriFlex™ models. The tool-free, quick-change cutting units make servicing the cutting units fast and easy and a lift-gate footrest provides easy access to the center cutting unit.
Features may include:
Stored Energy- Eliminates clip marks at the startup of a mowing pass and provides braking power to stop reels from spinning when cutting units are disengaged for safer operation.
- The suspension system is designed to provide a slight lift to the inside of the cutting units during turns to deliver a consistently level cut and to reduce "triplex ring" for improved playability and turf health.
- Ten miles per hour (16.1 km/h) transport speeds will allow you to stay ahead of golfers and get more greens cut in a shorter time.
- The most advanced cutting unit in the industry:Only two adjustmentsSuperior height-of-cut retentionNo daily greasing (stainless steel bearings)Consistent cutting edge regardless of reel wear (patented)Smallest bedknife increment adjustments .007inch (.178mm)
- A single operator can go from cutting Greens at 0.125" (3.2 mm) to cutting a Fairway at ¾" (19 mm) in just minutes. The tool-free, quick-change cutting units make it as easy as 1-2-3.
Engine
Cooling
Air Cooled
Engine
Briggs & Stratton® Vanguard®
Engine Power
21hp (15.6kW) @3600 rpm
Governor
2920 rpm
Displacement
38.3 cu-in. (627 cc)
Fuel System
Fuel Type
Hybrid - Gas
Drivetrain
Drivetrain
Hybrid | Implement: 48V-5400 watt air-cooled brushless permanent magnet generator in parallel with 48V 9Ah battery set powers three 48V-1100 watt brushless permanent magnet reel motors. 4-12V 9Ah sealed, maintenance-free, VRLA batteries. 48-volt system is isolated from 12-volt including the frame/chassis. | Traction Drive: 2WD
Steering
No-tool quick adjust steering arm position with power assist allowing a wide range of operator sizes. Steering cylinder has a through shaft design for precise straight line tracking.
Drive System
2WD parallel hydrostatic. Foot pedal forward and reverse; infinitely variable.
Brakes
Parking Brake
Off - On
Brake System Type
Hand-actuated parking brake lever with two 6" (15.2 cm) diameter drum brakes mounted on the front wheel motors.
Battery
Battery
12V
Electric
Electrical
12-volt lead acid, group size U1, with 300 minimum CCA at 0° F and 34 minutes reserve capacity at 85° F / 25 amps draw. 50 amp alternator. Seat switch.
Generator
48V-5400 watt air-cooled brushless permanent magnet generator in parallel with 48V 9Ah battery set powers three 48V-1100 watt brushless permanent magnet reel motors with separable controller.
Wheels & Tires
Tires, Front Specification
19" x 10.5" - 8", 4-ply, Smooth Tread
Tires, Rear Specification
19" x 10.5" - 8", 4-ply, Smooth Tread
Operational
Operating Speed
Ground Speed - Forward: 0 - 10 mph (0 - 16.1 km/h) | Mowing Speed: 0 - 5 mph (0 - 8 km/h)
Chassis
Frame Type
48-volt system is isolated from 12-volt including the frame/chassis.
Performance
Noise Level
Sound Power: Sound level of 80 dB(A) at operator’s ear under normal conditions.
Dimensions
Dimensions
Blade: 5" (13 cm) | Weldment shaft: 1.375" (35 mm) | Reel Diameter: 5" (13 cm)
Length
98" (249 cm) | Blade: 21" (53.3 cm)
Ground Clearance
4.5" (11.4 cm)
Height
80.83" (205 cm) | of Cut Range: Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.
Overall Width
70.84" (180 cm) with reels
Wheelbase
47" (119 cm)
Cutting Width
59" (150 cm)
Capacities
Fuel Capacity
6 U.S. gal. (22.7 L)
Weights
Weight
1,257 lbs. (570 kg)
Features
Features
Bedknife: Replaceable single edged EdgeMax™ Microcut Bedknife is standard. | Blade Style/Type: Reel | Number of Blades: 11, 14, 8
Construction Material
Cutting Unit Type/Configuration: Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)
Gauges
InfoCenter™: Onboard LCD shows gages, alert/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake status, reel speed setting, backlap control. Clip control setting.