2024 Toro Greensmaster® 3150/3250 3250-D (04384)

Information

2024 Toro Greensmaster® 3150/3250 3250-D (04384)

The Greensmaster 3250-D is distinguished for its field-proven performance and exceptional quality of cut. Equipped with patented DPA cutting units for a superior cut and minimal maintenance, convenient controls for easy operation, and ample power to handle any application–it’s no wonder this classic model has been trusted over the years to deliver the performance golf courses demand with a putting surface that exceeds expectations.

Features may include:

EdgeSeries™ Reels
  • Dual Precision Adjustment (DPA) cutting units – featuring Toro’s EdgeSeries™ reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention.
Safe Operation
  • The placement of the center cutting unit, located between the the front traction wheels, along with the front center basket removal, allows a low mounting design of the transmission and engine. This lowers the center of gravity, giving the machine much higher hillside stability.
Perfect Triangle Wheel Stand Design
  • The Triangle Wheel Stand places the rear wheel track within the radius of the front wheel, which prevents accidentally dropping the rear wheel into a nearby sand bunker while making the turn for the next mowing path.
Maintenance Ease
  • All components, especially those that require daily inspection and routine maintenance, are conveniently located for servicing. The Greensmaster® 3250 has fewer hydraulic lines and connectors. All hydraulic components are positioned for easy visual inspection.
Leak Detection
  • The dependable Turf Guardian™ leak detection technology alerts the operator if a leak occurs.

Photos

Highlights

  • Edmunston, New Brunswick
  • 2024
  • Toro
  • Greensmaster® 3150/3250 3250-D (04384)
  • Kubota® 902 tier 4i
  • Diesel
  • Available
  • 77.5" (197 cm) | of Cut Range: Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.

Specifications

  • 2024
  • Toro
  • Greensmaster® 3150/3250
  • 3250-D (04384)
  • Riding
  • Kubota® 902 tier 4i
  • Liquid Cooled
  • 24.8 hp (18.5 kW) @ 3600 rpm
  • 3-cylinder
  • to 2760 rpm high idle
  • 55.0 cu. in. (902 cc)
  • Diesel
  • Diesel | Traction Drive: 2WD
  • No-tool quick adjust steering arm position, with arm motion allowing a wide range of operator sizes. Steering cylinder has through shaft design for precise straight line tracking.
  • Hydraulic piston pump, closed loop system. 2WD Parallel Hydrostatic Foot pedal forward and reverse; infinitely variable.
  • Foot activated 6" (15.2 cm) drum type mechanical with rack and pawl lock for parking.
  • 12V
  • Frequency/Backlapping: Adjustable up to 1950 RPM at 2760 engine RPM. Backlapping standard. | System: Maintenance-free 12-volt battery with 530 minimum CCA at 0° F. 40 amp alternator, circuit fused at 40 amps. Seat switch. High temperature engine kill override switch.
  • 19" x 10.5" - 8", 4-ply, Smooth Tread
  • 19" x 10.5" - 8", 4-ply, Smooth Tread
  • Ground Speed - Forward: 0 - 10 mph (0 - 16.1 km/h) | Mowing Speed: 2 - 5 mph (3.2 - 8 km/h)
  • Sound Power: Sound level of 84 dBA at operator ear under normal conditions.
  • Blade: 5" (13 cm) | Weldment shaft: 1.375" (35 mm) | Reel Diameter: 5 in. (12.7cm)
  • 93.9" (238 cm) with baskets | Blade: 21" (53.3 cm)
  • 8 - 12 psi (.55 - .83 bar) average at recommended minimum tire pressures, with a 200 lb. operator and cutting units down.
  • 77.5" (197 cm) | of Cut Range: Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.
  • 68" (173 cm)
  • 48.6" (123 cm)
  • 59" (150 cm)
  • 6 U.S. gal. (22.7 L)
  • 1,216 lbs. (552 kg) with no fuel & no operator
  • Bedknife: Replaceable single edged EdgeMax™ Microcut Bedknife is standard. | Blade Style/Type: Reel | Number of Blades: 11, 14, 8
  • Cutting Unit Type/Configuration: Cutting units are completely free-floating, each attaching to the tractor by direct pull links and lifted by a centered lift arm. Baskets are supported by carrier frames that are ground following. Cutting unit floatation is unaffected by basket content. Grass baskets are all interchangeable and accessible from the front of the machine. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)
  • Hour meter and warning light cluster.